Actia Psa Xs Evolution - Drivers ((exclusive))

: While official drivers support Windows 10 and 11, many older versions of Lexia 3 and PP2000 require Windows XP SP3 (32-bit) or Windows 7 (32-bit) .

: Windows should attempt to detect the device. If it fails, open Device Manager and look for a "USB-to-CAN" or "ACTIA" entry with a yellow exclamation mark.

: Right-click the device, select "Update Driver," and point the wizard to the folder where you installed DiagBox (usually C:\APP\Drivers ). actia psa xs evolution drivers

: For DiagBox 7.xx and newer, your adapter firmware should ideally be Version 4.3.2 (Reference "C"). Older Reference "B" adapters may only work with DiagBox 6.xx or earlier. Common Troubleshooting Support - ACTIA IME

The most reliable way to obtain drivers for an original ACTIA device is through the . Depending on your specific model, you may need one of the following: : While official drivers support Windows 10 and

: The ACTIA IME Support Center provides the Basic+ XS / CAT Level X driver (Version 2.9.0.8) and the Lite XS Level X driver (Version 2.9.0.0). These are compatible with Windows 8, 10, and 11 (x86/amd64).

: Always install the diagnostic software (e.g., DiagBox) before plugging in the hardware. Most modern versions include the necessary drivers in the installation package. Connect Hardware : Plug the ACTIA PSA XS Evolution into your computer’s USB port. : Right-click the device, select "Update Driver," and

The is a professional-grade diagnostic interface used primarily for Peugeot and Citroën vehicles. To ensure the hardware communicates correctly with software like DiagBox, Lexia 3, or PP2000, installing the correct drivers is the most critical step. Official Driver Sources

: If using a 64-bit system for older software, it is often necessary to run the software and drivers within a Virtual Machine (VMware) running a 32-bit version of Windows.