Audiosonic Caa-09169 Clock Radio Manual Work [upd] -

While the alarm time is flashing, use the HOUR and MIN buttons to select your wake-up time.

Press and hold the TIME SET (or CLOCK ) button for about 2 seconds until the display begins to flash.

Fully unroll the FM wire antenna for clear reception. Audiosonic Caa-09169 Clock Radio Manual WORK

In Standby, press and hold the ALARM 1 or ALARM 2 button.

While the digits are flashing, press the HOUR button to advance the hours. Ensure you check the PM indicator (usually a small light on the side of the display) to set the correct half of the day. While the alarm time is flashing, use the

Setting the time is usually done while the unit is in (radio turned off).

The is a classic digital clock radio designed for simplicity and reliability. If you’ve lost your paper manual, this guide provides the essential operating instructions to get your device back in sync. Initial Setup & Power In Standby, press and hold the ALARM 1 or ALARM 2 button

Open the battery compartment on the bottom to install a backup battery (typically a 9V or CR2032, depending on the revision). This ensures your settings are saved during a power outage. Setting the Clock Time

The alarm indicator light should now be visible on the display, signifying the alarm is active. Kmarthttps://www.kmart.com.au BIG DISPLAY ALARM CLOCK USER MANUAL - Kmart

Plug the AC power cord into a standard 230V wall outlet.