Before diving into assembly, it helps to know what you’re working with: Hi-Tech Magnetic Resistance. Drive System: Quiet ribbon belt drive.
Body Sculpture BC 5700 Magnetic Bike: The Ultimate Setup & Maintenance Guide
Assembling the BC 5700 typically takes 30–45 minutes. You will need the basic toolkit (Allen key and multi-wrench) usually provided in the box. Step 1: Stabilizers Body Sculpture Bc 5700 Magnetic Bike Manual
Always wear athletic shoes; never operate the bike barefoot or in loose sandals.
Note: Failure to follow the threading direction can strip the crank arms. Step 3: Seat and Seat Post Before diving into assembly, it helps to know
Feed the pulse sensor wires through the handlebar post. Secure the handlebars with the T-knob. Finally, connect the monitor cables to the console and slide the console onto the bracket at the top of the post. 3. Operating the Console The BC 5700 features a user-friendly computer. Start pedaling or press any button. Mode Button: Toggle between metrics (Time, Speed, etc.).
You can set a countdown for Time, Distance, or Calories by pressing the "Set" button before you start pedaling. 4. Maintenance and Troubleshooting Squeaking Noises You will need the basic toolkit (Allen key
Scan, Time, Speed, Distance, Calories, and Odometer.
Attach the (usually featuring transport wheels) and the Rear Stabilizer to the main frame. Secure them using the carriage bolts, curved washers, and acorn nuts. Ensure they are tight to prevent rocking during high-intensity sprints. Step 2: Pedals The pedals are side-specific. Right Pedal (R): Thread clockwise into the right crank arm.
If you feel no change when turning the tension knob, the internal tension cable may have slipped. You will need to remove the plastic side shrouds to re-hook the cable to the magnetic brake assembly. Console Not Lighting Up