The AP and your TFTP server must be on the same subnet (e.g., 10.0.0.x) for the transfer to succeed.

Operates as a standalone device with its own local management interface.

Allow for granular command-line (CLI) or web interface management directly on the device. How to Install the Firmware

Cisco access points generally run one of two types of firmware:

Eliminate the need for an expensive hardware controller.

Download the .tar image from the Cisco Software Central (requires a valid contract) and set up a TFTP server on your computer.

Ensure the file on your TFTP server matches the name the AP is searching for exactly.

From the AP's command line, administrators often use the archive download-sw command. A common manual recovery method involves holding the "Mode" button while powering on the device to force it to look for a specific file name, such as c1240-k9w7-tar.default , on the TFTP server. Troubleshooting and Best Practices

Always use a console cable to monitor the boot process. This allows you to see if the AP is failing to find the image or encountering memory errors. C1240 K9w7 Tar 124 25d Ja2 Tar - Google Groups