Connect the device to your PC or Mac via USB. It will be recognized as a . You can then open the folders to view, move, or delete your AVI video files and JPEG photos. Setting the Date/Time Stamp To ensure your evidence is time-accurate: CCDS820 Keychain Camera Operating Instructions
450 mAh lithium-polymer battery providing approx. 80–120 minutes of continuous recording.
This mode saves storage and battery by only recording when movement is detected. Ccd S820 Manual
The red/blue lights will blink 6 times and then go off, indicating it is now monitoring for movement.
Supports external Micro SD (TF) cards up to 32GB (Class 10 recommended). Connect the device to your PC or Mac via USB
USB 2.0 interface for charging and data transfer. 2. Initial Setup: Charging and Memory Inserting the Micro SD Card The camera requires a Micro SD card to store footage. Slide off the back cover of the key fob. Locate the SD card slot.
The device is typically controlled by three buttons, often labeled or shaped like "Unlock," "Lock," and "Trunk" on the fob. Light Indicator Press "Unlock" for 3 seconds Solid Red (Standby Mode) Start Video Long press "Trunk" for 3 seconds Red light blinks 3x and goes out Stop & Save Press "Trunk" for 1 second Red light returns to solid Take a Photo Short press "Trunk" once Red light blinks once Night Vision Press "Lock" (or Detection) button Mode activates (no visible light) Power Off Press "Unlock" for 3 seconds Light turns off 4. Advanced Recording Modes Motion Detection Setting the Date/Time Stamp To ensure your evidence
A red light will flash while charging and turn off (or stay solid, depending on the specific model variation) when fully charged.
The CCD S820 uses 850nm IR LEDs that are invisible to the human eye. To toggle this, click the dedicated night vision button while in any recording mode. It is particularly effective for close-range surveillance in low-light environments. Accessing Footage