According to official specifications from Revelation Machinery and industrial equipment guides, the ChipBLASTER JV10 features the following mechanical and electrical footprint: 1500 PSIG (103.4 BAR) Coolant Volume: 10 Gallons Per Minute (37.8 LPM) Integral Tank Capacity: 48 Gallons Power Requirement: 460V / 3-Phase / 60 Hz Motor Rating: 7.5 HP Footprint Dimensions: 35″ Depth x 55″ Width Key System Components
These latching signals activate and deactivate the high-pressure pump during your machining cycle. Basic Operating Procedures chipblaster jv10 manual
+--------------------------+-----------------------+------------------------------------------+ | Maintenance Task | Frequency | Purpose | +--------------------------+-----------------------+------------------------------------------+ | Check Filter Gauges | Daily | Monitor for pressure differential drops | | Purge Air via Petcocks | After filter change | Prevent pump cavitation & dry-running | | Clean Sump and Tank | Bi-Annually | Eliminate sludge and debris buildup | | Check Line Hose Wear | Monthly | Prevent dangerous line ruptures | +--------------------------+-----------------------+------------------------------------------+ Troubleshooting Faults Loosen the locknut on the pressure regulator
Open the 1/4" petcock valves located on top of both the primary and safety filters. Routine Maintenance & Troubleshooting
Trigger the high-pressure coolant via M-code on the CNC controller. Loosen the locknut on the pressure regulator.
If you need to discuss specific parts or have questions about a particular machine interface, please let me know: Your (e.g., Haas, Mazak)
Lock down the regulator and uncap the line. . Routine Maintenance & Troubleshooting