Chunghop Eh907 Manual Full ((hot)) -

Point the remote at the device and test the Power, Volume, and Channel buttons. If they don't work, repeat the process with the next code in the list. Method B: Manual Code Search

Use this if your brand isn't listed or the codes aren't working. Turn on your device.

If the "Volume" button changes the channel, you have the wrong code. Continue searching for a more compatible code. chunghop eh907 manual full

If you have the code list for your brand (see the common codes section below), this is the most reliable method. the device you want to control (e.g., your TV).

Press and hold the button and the corresponding Device Button (TV, DVD, SAT, etc.) simultaneously until the indicator light stays on. Enter the 3-digit code for your brand. If the code is correct, the light will turn off. Point the remote at the device and test

As soon as the device turns off, press the (TV) to lock in the code. Method C: Automatic Search Turn on your device.

Avoid using rechargeable batteries during the initial setup phase, as their lower voltage can sometimes interfere with the infrared (IR) signal strength while the remote is searching for codes. 2. How to Program the Chunghop EH907 Turn on your device

Press and hold the button for about 5 seconds until the light stays on. The remote will begin sending signals automatically.

008, 011, 016, 021, 025, 033, 037, 039, 040, 043, 050, 051, 091, 113, 123, 138, 139