Denzel Dt-52 Manual ((better)) -

Before operating the unit, it is helpful to know what is under the hood. Air-cooled, 2-stroke single cylinder. Displacement: 52cc.

Press the primer bulb under the carburetor 5–8 times until fuel is visible in the clear lines.

Move the choke lever to the "ON" (open/run) position. denzel dt-52 manual

Use a grease gun to add lithium-based grease to the gear head bolt. Every 50 Hours

Typically 25:1 or 40:1 (Refer to the label on your specific fuel tank or the oil bottle). Fuel Type: Use Unleaded 92 or 95 octane. Before operating the unit, it is helpful to

Move the engine switch on the handle to the "ON" or "I" position.

Remove grass clippings from the cooling fins and the safety guard. Inspect the blade: Check for cracks or dullness. Every 10–15 Hours Press the primer bulb under the carburetor 5–8

Ensure no people or pets are within 15 meters (50 feet) of operation.

To ensure your Denzel DT-52 lasts for years, follow this maintenance checklist found in the manual: After Every Use