Applied when the edge of one part meets the surface of another at an angle, common in supports and frames.
For corner and T-joints, the leg size is established during design but generally should not exceed 1.2 times the thickness of the thinner part. Understanding Designations
Typically ranges from 1mm to 4mm. In construction/installation conditions, this can be increased to 4mm for materials thicker than 16mm. gost 526480 english pdf better
Permissible displacement ranges from 0.5mm for thin materials to up to 4mm for parts exceeding 100mm in thickness.
Includes specifications for V-shaped, U-shaped, and K-shaped beveling. Applied when the edge of one part meets
Created by overlapping two sheets and welding along the perimeter, frequently used for thinner metals. Key Design Elements and Tolerances
For international projects or English-speaking teams, obtaining an official translation is vital for accuracy. Several platforms provide the full text and technical drawings: Created by overlapping two sheets and welding along
GOST 5264-80 classifies welded joints into four primary categories, each designated by a specific letter for identification on technical drawings: