H-ig41-uatx Rev 1.1 Manual !!hot!! May 2026

Note: This board is often picky with "high-density" RAM. For best results, use "low-density" modules (chips on both sides of the stick). Internal Headers and Connectors

The H-IG41-uATX (Revision 1.1) is a legacy motherboard commonly found in HP and Compaq Pavillion desktop systems, such as the Slimline series. Manufactured by Foxconn (often referred to by its codename, Eton), this board utilizes the Intel G41 Express chipset. Since official digital manuals for these OEM boards are often difficult to locate, this guide serves as a comprehensive technical reference for installation, jumper settings, and hardware compatibility. Technical Specifications h-ig41-uatx rev 1.1 manual

The H-IG41-uATX Rev 1.1 supports a variety of 65nm and 45nm Intel processors. Note that the maximum Thermal Design Power (TDP) for this board is typically 65W or 95W depending on the specific BIOS version. Note: This board is often picky with "high-density" RAM

BIOS Updates: Because this is an OEM board, BIOS updates must be sourced from the HP or Compaq support site for the specific model the board came from. Flashing a generic Foxconn BIOS is risky and can brick the board.Power Supply: Requires a standard 24-pin ATX power connector and a 4-pin ATX_12V CPU power connector.SATA Mode: The ICH7 southbridge lacks AHCI support in many versions of this board. If you are installing an SSD, ensure the BIOS is set to "IDE" or "Compatibility" mode if "AHCI" is not an option. Manufactured by Foxconn (often referred to by its