: Watch the screen as it boots. When the "Start" prompt or progress bar appears, tap the screen anywhere using your finger or a stylus.
: Always calibrate after a screen replacement or significant firmware update. Step-by-Step MCGS HMI Calibration Process mcgs hmi touch calibration
: Turn off the power to the HMI and then turn it back on. : Watch the screen as it boots
: Once you have tapped the screen, wait approximately 30 seconds . The system will automatically enter the touch screen calibration utility. 2. Executing the Calibration Step-by-Step MCGS HMI Calibration Process : Turn off
: A small crosshair cursor ("+") will appear on the screen.
: Tapping a button triggers the element next to it.
Most modern MCGS TPC series devices follow a built-in startup routine to access calibration settings. 1. Entering the Boot Setup Interface