The Paltronic 50 system is a common load moment limiting system found on many truck-mounted cranes. Description Potential Cause/Solution Overload Situation Crane has reached its load limit. Reduce load moment. 16. Broken Connection Connection to level indicator on fly jib (B301) is broken. 20. High Signal (U230)
Some errors (e.g., codes in the 30-31 range) indicate internal radio controller hardware issues, such as RAM or EEPROM errors. Initial Troubleshooting Steps Before calling a technician, perform these basic checks: Palfinger Crane Error Codes Guide | PDF - Scribd
These are informational and appear during normal crane operation (e.g., reaching a load limit). They usually disappear automatically once the condition is corrected (e.g., reducing the load moment). palfingercranemanualerrorcodes
): Simultaneously press and hold the and OLP buttons on the main console. The display will flash two sets of numbers; note the decimal point position (e.g., "21.12").
The method for viewing codes varies by model and control system: Paltronic 40 PK8501 SLD The Paltronic 50 system is a common load
Palfinger systems distinguish between and Error Codes to help operators differentiate between normal operational limits and actual technical failures.
These signal a technical fault in the system, such as a broken cable or sensor failure. Unlike status codes, these will not disappear automatically after a repair; the system must be manually reset by restarting or pressing the OLP button . Common Paltronic 50 Error Codes High Signal (U230) Some errors (e
Navigating is essential for maintaining operational safety and minimizing downtime. Palfinger electronic control systems, such as the Paltronic 50 and Paltronic 150 , use standardized numeric codes to indicate specific system statuses or hardware malfunctions. Understanding Palfinger Error Code Types
Pressure transducer on main boom piston side (U230) signal is too high. Check for short circuit in cable. High Signal (U231)