Point-n-measure Digital Tape: W5746 User Manual

Most models feature an auto-shutoff after 30–60 seconds of inactivity to save battery. Selecting the Measurement Point

Point-N-Measure Digital Tape W5746: Complete User Manual & Guide

This usually means the device is too close to a surface (under 2 feet) or the signal is being absorbed by a soft surface (like curtains). Try measuring against a solid, flat wall. Point-N-Measure Digital Tape W5746 User Manual

Ensure the device is held perfectly perpendicular to the target. An angled measurement will result in an incorrect distance.

Press the button. The distance will appear on the LCD screen. Calculating Area (Sq. Ft / m²) Press the AREA button. Measure the Length of the room (Press READ). Measure the Width of the room (Press READ). Most models feature an auto-shutoff after 30–60 seconds

The laser is for aiming purposes only. Note that the actual measurement is taken by the ultrasonic sensor; ensure the path is clear.

Measure the , then the Width , then the Height of the space. Ensure the device is held perfectly perpendicular to

By following this manual, your will become an indispensable tool in your kit, saving you time and ensuring your projects are measured to perfection.

Switchable between Imperial (Feet/Inches) and Metric (Meters). 2. Getting Started: Basic Operation Battery Installation Open the battery compartment on the back of the device. Snap in a fresh 9V alkaline battery .

This comprehensive guide serves as your digital manual to help you master the W5746 and get the most out of its features. 1. Product Overview & Key Specifications