Updated [new] — Rc522 Proteus Library

#include #include #define SS_PIN 10 #define RST_PIN 9 MFRC522 mfrc522(SS_PIN, RST_PIN); void setup() { Serial.begin(9600); SPI.begin(); mfrc522.PCD_Init(); Serial.println("Scan a card in Proteus..."); } void loop() { if ( ! mfrc522.PICC_IsNewCardPresent()) return; if ( ! mfrc522.PICC_ReadCardSerial()) return; // Show UID on Virtual Terminal Serial.print("Card UID:"); for (byte i = 0; i < mfrc522.uid.size; i++) { Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "); Serial.print(mfrc522.uid.uidByte[i], HEX); } Serial.println(); } Use code with caution. Testing the Simulation

Once your circuit is wired, you need to upload the Hex file to your Arduino. Use the standard MFRC522.h library in the Arduino IDE. rc522 proteus library updated

The RC522 is a highly popular 13.56MHz RFID reader/writer. Earlier versions of Proteus libraries often suffered from: #include #include #define SS_PIN 10 #define RST_PIN 9

Most updated RC522 libraries come with a "Test Tag" or "Key Fob" component. Place it near the RC522 module in your schematic. Use the standard MFRC522

Navigate to your Proteus installation directory. It is usually found at:

Ensure you placed the files in the Data\LIBRARY folder, not just the root program folder.