S-tec 55x Installation Manual Patched -

Confirm you can manually overpower the servos with reasonable force.

Ensure "Left Turn" on the autopilot moves the yoke/stick left. S-tec 55x Installation Manual

Before opening the airframe, ensure you have the following ready: Confirm you can manually overpower the servos with

Check that servos do not hit their internal stops before the flight controls hit their external stops. S-tec 55x Installation Manual

Mount the pressure transducer on a rigid surface to prevent signal "noise." 🧪 Post-Installation Ground Checks Once the hardware is secure, perform these tests:

The programmer/computer is designed for a standard 6.25-inch radio rack. Position within easy reach of the pilot.