If you live in an area with poor signal reception, you may need to set the clock manually: Press and hold the button for 3 seconds.
To get started, you will need . Open the battery compartment on the back of the clock. sharp atomic clock spc373 user manual
If you’ve lost your physical copy of the , this guide covers everything from initial setup to troubleshooting signal issues. 1. Initial Setup and Battery Installation If you live in an area with poor
This is almost always a setting issue. Refer to Section 2 to ensure you have selected the correct zone (P, M, C, or E). The atomic icon is missing or flashing. If you’ve lost your physical copy of the
Atomic clocks require a consistent voltage to maintain the radio receiver. Even if the clock face looks visible, low batteries can prevent the "Atomic" sync from working. Quick Reference Specs Model: SPC373 Power Source: 2 x AA Batteries
The "Atomic" feature works via a built-in antenna that listens for a 60kHz radio signal.
The will flash. Use the UP/DOWN buttons to adjust, then press SET . Repeat this process for Month , Date , Hour , and Minute .