This article covers everything you need to know about downloading, preparing, and flashing the full stock ROM for this specific chipset. What is SP7731E 1H10 Firmware?

Usually, for a "Native Full" flash, you don't need to change settings. However, ensure that under the "Backup" tab, all items are checked if you want to preserve your IMEI (though a full flash often overwrites these). 4. The Flashing Process Click the (the Play icon) in the tool. Power off your device completely.

Once the progress bar turns green and says unplug the phone and remove/reinsert the battery (if removable). Power the device on. The first boot may take 5–10 minutes. Troubleshooting Common Issues

Try a different USB port (preferably USB 2.0) or a different micro-USB cable. Conclusion

Understanding SP7731E 1H10 Native Firmware: A Complete Guide

Ensure the filename explicitly mentions 1H10 .

At least 50% to prevent the phone from dying mid-process.

Download and extract the Spreadtrum Drivers. Right-click the .inf files to install or use the auto-installer. This allows your PC to communicate with the SP7731E chip via a COM port. 2. Load the Firmware

sp7731e 1h10 native firmware full