Installation Manual Exclusive - Ts1162

Before beginning the installation, ensure you are familiar with the device’s capabilities as outlined in the Aritech TS1162 Datasheet .

: Connects via the Challenger RS-485 LAN , supporting distances up to 1.5 km from the main controller.

: Use appropriate screws or bolts for the surface material (e.g., masonry anchors for brick or self-tapping screws for metal). Tighten firmly but avoid over-tightening, which can warp the plastic housing. Step 3: Wiring and Connections ts1162 installation manual exclusive

The is a specialized access control and security keypad designed for durability in demanding environments. This guide provides an exclusive, detailed walkthrough for installing and configuring the Tecom TS1162 within a Challenger security system. Key Specifications and Features

: Three status LEDs provide clear system arming and area status information. Step 1: Pre-Installation Requirements Before beginning the installation, ensure you are familiar

Once hardware is installed, the RAS must be identified by the Challenger panel.

: Log in to the Challenger Installer Menu (typically Menu + Installer Code + 19) to add and configure the new station. Tighten firmly but avoid over-tightening, which can warp

: Select a flat, solid, vertical surface. Mounting on uneven surfaces can cause the base to flex, potentially compromising the IP67 seal.