Urmet 1131 Manual [upd] Full ❲Official | 2025❳

: Insert each wire into the corresponding terminal (CA, 1, 2, 6, 9/10) and tighten the screws firmly.

by pressing the small tab at the bottom. Position the base on the wall and mark the mounting holes. Secure it using the provided screws and wall plugs. urmet 1131 manual full

Before starting, ensure you have basic tools like a small flathead screwdriver and wire strippers. : Insert each wire into the corresponding terminal

: While the handset is lifted or the call is active, press the door release button to verify the lock triggers. Important Technical Notes Connecting and Replacing Old Intercom with New Urmet 1131 Secure it using the provided screws and wall plugs

: Hang up the handset and have a visitor press your bell. The electronic tone should be audible.

: If your old system has a common ground for the lock and audio, terminal 6 may need a link to terminal 10. Testing the System :