Xmk-010 Manual Repack -

The XMK-010 is designed for flush mounting in a 71x29mm cutout.

The is a highly versatile, microcomputer-based digital temperature controller designed for precision monitoring and control in various refrigeration, heating, and industrial applications. Featuring a compact design, it is widely used in cold storage, incubators, greenhouses, and HVAC systems to manage temperatures within a range of -50°C to 50°C.

Real-time temperature measurement with an LED screen. xmk-010 manual

Note: In refrigeration mode, setting a compressor delay (e.g., 3-5 minutes) is recommended to prevent rapid cycling. 4. Operational Modes: Heating vs. Cooling The XMK-010 can be configured for one of two modes:

Maintaining strict temperature for food preservation. The XMK-010 is designed for flush mounting in

The XMK-010 utilizes a simple, menu-driven interface to set operation parameters. 3.1. Setting the Target Temperature Press the once. The display will flash.

To enter the parameter menu (e.g., hysteresis or compressor delay): Hold down the for more than 3 seconds. Use the arrows to navigate through parameters. Real-time temperature measurement with an LED screen

This will help me provide precise troubleshooting steps for your XMK-010.

The controller features self-diagnostic capabilities to ensure safety. Symptom/Error Code Possible Cause No voltage or faulty wiring Check 220V power connection. Display shows "EEE" or "---" Sensor error: Short circuit or open circuit Check NTC sensor connections. Replace sensor if necessary. Compressor won't start Compressor delay active

Wait for the delay time (typically set in parameters) to expire. Incorrect Hysteresis (Differential) setting Increase/decrease the differential setting in the menu. 6. Applications