Zxdz 01 Firmware Update ★

If your PC doesn't see the ZXDZ-01, the culprit is usually the driver. Reinstall the CH340 or CP210x drivers (depending on your specific board revision) and try a different USB port.

Click "Load" and select the new firmware file you downloaded. zxdz 01 firmware update

This often indicates a communication timeout. Lower the "Baud Rate" setting in your flashing tool to 9600 or 115200 and attempt the process again. If your PC doesn't see the ZXDZ-01, the

A Windows-based PC (most ZXDZ configuration tools are Windows-native). The current version of the ZXDZ Configuration Port drivers. zxdz 01 firmware update

Click "Start" or "Update." Do not disconnect the cable until the progress bar reaches 100% and the "Success" message appears. Troubleshooting Common Issues